Here is a list of publications that have utilised AIM equipment:


Potts S, Korochkina T, Holder A, Jewell E, Phillips C, Claypole T (2022). The influence of carbon morphologies and concentrations on the rheology and electrical performance of screen-printed carbon pastes Journal of Materials Science
de Boode B, Phillips C, Lau Y, Adomkevicius A, McGettrick J, Deganello D (2022). Glassy carbon manufacture using rapid photonic curing Journal of Materials Science
Gangoli V, Yick T, Bian F, Orbaek White A (2022). From Waste Plastics to Carbon Nanotube Audio Cables C
Liu G, Kong L, Xiao X, Birosca S (2022). Microstructure evolution and phase transformation in a nickel-based superalloy with varying Ti/Al ratios: Part 2 - Phase transformation Materials Science and Engineering: A
Liu G, Kong L, Xiao X, Birosca S (2022). Microstructure evolution and phase transformation in a nickel-based superalloy with varying Ti/Al ratios: Part 1 - Microstructure evolution Materials Science and Engineering: A
Gu W, Campbell J, Tang Y, Safaie H, Johnston R, Gu Y, Pleydell-Pearce C, Burley M, Dean J, Clyne T (2022). Indentation Plastometry of Welds Advanced Engineering Materials
Wei C, Liu L, Cao H, Zhong X, Xu X, Gu Y, Cheng D, Huang Y, Li Z, Guo W, Liu Z, Li L (2022). Cu10Sn to Ti6Al4V bonding mechanisms in laser-based powder bed fusion multiple material additive manufacturing with different build strategies Additive Manufacturing
Safaie H, Coleman M, Johnston R, Das A, Russell J, Pleydell-Pearce C (2022). Circular polarized light microscopy to investigate the crystal orientation of aluminium Materials Characterization
Kevorkyants R, Farooq S, Tizaoui C (2022). Crystal and electronic structure of the sub-stoichiometric photocatalyst Cu4Se6: DFT study Journal of Physics and Chemistry of Solids
Wei C, Gu H, Gu Y, Liu L, Huang Y, Cheng D, Li Z, Li L (2022). Abnormal interfacial bonding mechanisms of multi-material additive-manufactured tungsten-stainless steel sandwich structure International Journal of Extreme Manufacturing
Howarth JR, White AO, Hedayati A, Niu Y, Palmer RE, Tang KW (2022). Interactions between multi-walled carbon nanotubes and plankton as detected by Raman spectroscopy. Chemosphere
Alaizoki A, Phillips C, Hardwick C, Parker D, Deganello D (2022). Enhanced liquid retention capacity within plastic food packaging through modified capillary recesses Journal of Food Engineering
Worsley C, Raptis D, Meroni S, Patidar R, Pockett A, Dunlop T, Potts S, Bolton R, Charbonneau C, Carnie M, Jewell E, Watson T (2022). Green solvent engineering for enhanced performance and reproducibility in printed carbon-based mesoscopic perovskite solar cells and modules Materials Advances
Hamdy L, Gougsa A, Chow W, Russell J, García-Díez E, Kulakova V, Garcia S, Barron A, Taddei M, Andreoli E (2022). Overcoming mass transfer limitations in cross-linked polyethyleneimine-based adsorbents to enable selective CO 2 capture at ambient temperature Materials Advances
Lewis A (2022). Flexographic printed nanogranular LBZA derived ZnO gas sensors: Synthesis, printing and processing


Arora H, Mitchell RL, Johnston R, Manolesos M, Howells D, Sherwood JM, Bodey AJ, Wanelik K (2021). Correlating Local Volumetric Tissue Strains with Global Lung Mechanics Measurements. Materials (Basel, Switzerland)
Lancaster R, Davies S, Jeffs S, Lewis D, Coleman M (2021). The effects of thermal exposure on the high temperature behaviour of a Laser Powder Bed Fused nickel based superalloy C263 Materials Science and Engineering: A
Khodabakhshi S, Kiani S, Niu Y, White A, Suwaileh W, Palmer R, Barron A, Andreoli E (2021). Facile and environmentally friendly synthesis of ultramicroporous carbon spheres: A significant improvement in CVD method Carbon
Kartopu G, Fan Q, Oklobia O, Irvine S (2021). Combinatorial study of the structural, optical, and electrical properties of low temperature deposited Cd1-Zn Te (0 ≤ x ≤ 1) thin films by MOCVD Applied Surface Science
Wint N, Malla A, Cooze N, Savill T, Mehraban S, Dunlop T, Sullivan J, Penney D, Williams G, McMurray H (2021). The ability of Mg2Ge crystals to behave as 'smart release' inhibitors of the aqueous corrosion of Zn-Al-Mg alloys Corrosion Science
Elrefaey A, Gu Y, James J, Kneen C, Crabbe I, Sienz J (2021). Analysis of a centreline failure of a lead alloy anode used in the copper electro-winning process Engineering Failure Analysis
Sheldon N, Mitchell R, Dzombak R (2021). Reconstructing Precambrian pCO2 and pO2 Using Paleosols
Clark R, Chan C, Steve Walters W, Engelberg D, Williams G (2021). Intergranular and Pitting Corrosion in Sensitized and Unsensitized 20Cr-25Ni-Nb Austenitic Stainless Steel Corrosion
Fisher L, Barron A,  ,  ,  , (2021). Suitability of Steel Making Slag as a Construction Material Resource Recent Progress in Materials
Khodabakhshi S, Taddei M, Rudd J, McPherson M, Niu Y, Palmer R, Barron A, Andreoli E (2021). Interplay between oxygen doping and ultra-microporosity improves the CO2/N2 separation performance of carbons derived from aromatic polycarboxylates Carbon
Omorogie M, Babalola J, Ismaeel M, McGettrick J, Watson T, Dawson D, Carta M, Kuehnel M (2021). Activated carbon from Nauclea diderrichii agricultural waste-a promising adsorbent for ibuprofen, methylene blue and CO2 Advanced Powder Technology
Shearan SJI, Jacobsen J, Costantino F, D'Amato R, Novikov D, Stock N, Andreoli E, Taddei M (2021). In Situ X-ray Diffraction Investigation of the Crystallisation of Perfluorinated CeIV -Based Metal-Organic Frameworks with UiO-66 and MIL-140 Architectures*. Chemistry (Weinheim an der Bergstrasse, Germany)
Stanners O, Russell J, John S, Davies HM, Marchisio S (2021). Powder Interlayer Bonding of Nickel-Based Superalloys with Dissimilar Chemistries. Materials (Basel, Switzerland)
Barnett CJ, McGettrick JD, Gangoli VS, Kazimierska E, Orbaek White A, Barron AR (2021). Effect of Applied Pressure on the Electrical Resistance of Carbon Nanotube Fibers. Materials (Basel, Switzerland)
Mitchell RL, Strullu-Derrien C, Sykes D, Pressel S, Duckett JG, Kenrick P (2021). Cryptogamic ground covers as analogues for early terrestrial biospheres: Initiation and evolution of biologically mediated proto-soils. Geobiology
Sullivan GL, Delgado-Gallardo J, Watson TM, Sarp S (2021). An investigation into the leaching of micro and nano particles and chemical pollutants from disposable face masks - linked to the COVID-19 pandemic. Water research
Claypole A, Claypole J, Kilduff L, Gethin D, Claypole T (2021). Stretchable Carbon and Silver Inks for Wearable Applications. Nanomaterials (Basel, Switzerland)
Mulla R, Dunnill C (2021). Fabrication of wooden thermoelectric legs to construct a generator Green Materials
Parkin J, Birosca S (2021). Crystallographic orientation influence on slip system activation and deformation mechanisms in Waspaloy during in-situ mechanical loading Journal of Alloys and Compounds
Rudd J, Hernandez-Aldave S, Kazimierska E, Hamdy L, Bain O, Barron A, Andreoli E (2021). Investigation into the Re-Arrangement of Copper Foams Pre- and Post-CO2 Electrocatalysis Chemistry
Mitchell RL, Davies P, Kenrick P, Volkenandt T, Pleydell-Pearce C, Johnston R (2021). Correlative Microscopy: a tool for understanding soil weathering in modern analogues of early terrestrial biospheres. Scientific reports
Kumar M, Gibbons G, Das A, Manna I, Tanner D, Kotadia H (2021). Additive manufacturing of aluminium alloy 2024 by laser powder bed fusion: microstructural evolution, defects and mechanical properties Rapid Prototyping Journal
Mulla R, Dunnill C (2021). Enhanced thermal sensitivity in single metal thermocouple: significance of thickness-engineering of the metal layers Engineering Research Express
Mulla R, Dunnill C (2021). Single material thermocouples from graphite traces: Fabricating extremely simple and low cost thermal sensors Carbon Trends
Ali MM, Mitchell JJ, Burwell G, Rejnhard K, Jenkins CA, Daghigh Ahmadi E, Sharma S, Guy OJ (2021). Application of Molecular Vapour Deposited Al2O3 for Graphene-Based Biosensor Passivation and Improvements in Graphene Device Homogeneity. Nanomaterials (Basel, Switzerland)
Whiteside J, de Vooys A, Sackett E, McMurray H (2021). Influence of uniaxial deformation on surface morphology and corrosion performance of chromium-based coatings for packaging steel Corrosion Science
Brown S, Evans S, Burgum M, Harris L, Jenkins R, Doak S, Clift M, Wilkinson T (2021). An In Vitro Model to Assess Early Immune Markers following Co-Exposure of Epithelial Cells to Carbon Black (nano)Particles in the Presence of S. Aureus: Differential Induction of Cytokines.
Oklobia O, Kartopu G, Jones S, Siderfin P, Grew B, Lee H, Tsoi W, Abbas A, Walls J, McGott D, Reese M, Irvine S (2021). Development of arsenic doped Cd(Se,Te) absorbers by MOCVD for thin film solar cells Solar Energy Materials and Solar Cells
Chen J, Giewont K, Walker E, Lee J, Niu Y, Kyriakidou E (2021). Cobalt-Induced PdO Formation in Low-Loading Pd/BEA Catalysts for CH 4 Oxidation ACS Catalysis
Khodabakhshi S, Fulvio P, Sousaraei A, Kiani S, Niu Y, Palmer R, Kuo W, Rudd J, Barron A, Andreoli E (2021). Oxidative synthesis of yellow photoluminescent carbon nanoribbons from carbon black Carbon
Barnett C, McGettrick J, Shenoy Gangoli V, Navarro-Torres J, Watson T, Maffeis T, Barron A, Orbaek White A (2021). Controlled and permanent induced Fermi shifts and upwards band bending in ZnO nanorods by surface stripping with argon bombardment Materials Letters
Dunlop T, Kesteven O, De Rossi F, Davies P, Watson T, Charbonneau C (2021). Exploring the Infiltration Features of Perovskite within Mesoporous Carbon Stack Solar Cells Using Broad Beam Ion Milling. Materials (Basel, Switzerland)
Cairns S, Chaudhuri S, Sigmund G, Robertson I, Hawkins N, Dunlop T, Hofmann T (2021). Wood ash amended biochar for the removal of lead, copper, zinc and cadmium from aqueous solution Environmental Technology & Innovation
Alaizoki A, Phillips C, Parker D, Hardwick C, Griffiths C, Deganello D (2021). Effect of plasma treatment on improving liquid retention capacity of capillary recesses for food packaging applications Food Packaging and Shelf Life
Orbaek White A, Hedayati A, Yick T, Gangoli VS, Niu Y, Lethbridge S, Tsampanakis I, Swan G, Pointeaux L, Crane A, Charles R, Sallah-Conteh J, Anderson AO, Davies ML, Corr SJ, Palmer RE (2021). On the Use of Carbon Cables from Plastic Solvent Combinations of Polystyrene and Toluene in Carbon Nanotube Synthesis. Nanomaterials (Basel, Switzerland)
Liu G, Kong L, Ruan S, Birosca S (2021). Microstructure and phases structure in nickel-based superalloy IN713C after solidification Materials Characterization
Mulla R, Jones D, Dunnill C (2021). Thin-films on cellulose paper to construct thermoelectric generator of promising power outputs suitable for low-grade heat recovery Materials Today Communications
Gangoli V, Barnett C, McGettrick J, Orbaek White A, Barron A (2021). Increased Electrical Conductivity of Carbon Nanotube Fibers by Thermal and Voltage Annealing C
Alaizoki A, Phillips C, Parker D, Hardwick C, McGettrick J, Deganello D (2021). Improvement in liquid absorption of open-cell polymeric foam by plasma treatment for food packaging applications Journal of Applied Polymer Science
Doolin A, Charles R, De Castro C, Rodriguez R, Péan E, Patidar R, Dunlop T, Charbonneau C, Watson T, Davies M (2021). Sustainable solvent selection for the manufacture of methylammonium lead triiodide (MAPbI 3 ) perovskite solar cells Green Chemistry
Bolton R (2021). Improved organic coating delamination resistance using physical vapour deposited Zn-Mg layers on strip steel


Nadoum A, Robinson F, Birosca S (2020). On the correlation between magnetic domain and crystallographic grain orientation in grain oriented electrical steels Journal of Magnetism and Magnetic Materials
Elrefaey A, Gu Y, James J, Kneen C, Crabbe I, Sienz J (2020). An investigation of the failure mechanisms of lead anodes in copper electrowinning cells Engineering Failure Analysis
Wyn Jones E, James Holliman P, Bowen L, Connell A, Kershaw C, Elizabeth Meza-Rojas D (2020). Hybrid Al2O3-CH3NH3PbI3 Perovskites towards Avoiding Toxic Solvents. Materials (Basel, Switzerland)
Stanners O, John S, Davies HM, Watkins I, Marchisio S (2020). The Effect of Processing Variables on Powder Interlayer Bonding in Nickel-Based Superalloys. Materials (Basel, Switzerland)
Wint N, Barrett Z, McMurray H, Williams G (2020). Combinatorial Studies into the Effect of Thermally Inter-Diffused Magnesium on the Kinetics of Organic Coating Cathodic Delamination from Zinc Galvanized Steel Journal of The Electrochemical Society
Birosca S, Nadoum A, Hawezy D, Robinson F, Kockelmann W (2020). Mechanistic approach of Goss abnormal grain growth in electrical steel: Theory and argument Acta Materialia
Liu G, Xiao X, Véron M, Birosca S (2020). The nucleation and growth of η phase in nickel-based superalloy during long-term thermal exposure Acta Materialia
Liu G, Winwood S, Rhodes K, Birosca S (2020). The effects of grain size, dendritic structure and crystallographic orientation on fatigue crack propagation in IN713C nickel-based superalloy International Journal of Plasticity
Holliman P, Connell A, Jones E, Kershaw C (2020). Metal Oxide Oxidation Catalysts as Scaffolds for Perovskite Solar Cells Materials
Péan E, De Castro C, Dimitrov S, De Rossi F, Meroni S, Baker J, Watson T, Davies M (2020). Investigating the Superoxide Formation and Stability in Mesoporous Carbon Perovskite Solar Cells with an Aminovaleric Acid Additive Advanced Functional Materials
Kunčická L, Macháčková A, Lavery N, Kocich R, Cullen J, Hlaváč L (2020). Effect of thermomechanical processing via rotary swaging on properties and residual stress within tungsten heavy alloy International Journal of Refractory Metals and Hard Materials
Tehrani Z, Whelan S, Mostert A, Paulin J, Ali M, Ahmadi E, Graeff C, Guy O, Gethin D (2020). Printable and flexible graphene pH sensors utilising thin film melanin for physiological applications 2D Materials
Atoyo J, Burton MR, McGettrick J, Carnie MJ (2020). Enhanced Electrical Conductivity and Seebeck Coefficient in PEDOT:PSS via a Two-Step Ionic liquid and NaBH4 Treatment for Organic Thermoelectrics. Polymers
Yadav A, Pandey R, Liao TW, Zharinov VS, Hu KJ, Vernieres J, Palmer RE, Lievens P, Grandjean D, Shacham-Diamand Y (2020). A platinum-nickel bimetallic nanocluster ensemble-on-polyaniline nanofilm for enhanced electrocatalytic oxidation of dopamine. Nanoscale
Wei Z, Dunlop T, Heard P, Charbonneau C, Worsley D, Watson T (2020). Successes and Challenges Associated with Solution Processing of Kesterite Cu 2 ZnSnS 4 Solar Cells on Titanium Substrates ACS Applied Energy Materials
Rudd J, Kazimierska E, Hamdy L, Bain O, Ahn S, Barron A, Andreoli E (2020). CO2 Reduction to Propanol by Copper Foams: A Pre- and Post-Catalysis Study
Lewis D, Ding R, Whittaker M, Mignanelli P, Hardy M (2020). The effect of oxidising thermal exposures on the fatigue properties of a polycrystalline powder metallurgy nickel-based superalloy Materials & Design
Lian Q, Mokhtar MZ, Lu D, Zhu M, Jacobs J, Foster AB, Thomas AG, Spencer BF, Wu S, Liu C, Hodson NW, Smith B, Alkaltham A, Alkhudhari OM, Watson T, Saunders BR (2020). Using Soft Polymer Template Engineering of Mesoporous TiO2 Scaffolds to Increase Perovskite Grain Size and Solar Cell Efficiency. ACS applied materials & interfaces
Hill D, Barron AR, Alexander S (2020). Controlling the wettability of plastic by thermally embedding coated aluminium oxide nanoparticles into the surface. Journal of colloid and interface science
De Rossi F, Barbé J, Tanenbaum D, Cinà L, Castriotta L, Stoichkov V, Wei Z, Tsoi W, Kettle J, Sadula A, Chircop J, Azzopardi B, Xie H, Di Carlo A, Lira-Cantú M, Katz E, Watson T, Brunetti F (2020). An Interlaboratory Study on the Stability of All-Printable Hole Transport Material-Free Perovskite Solar Cells Energy Technology
Lewis A, Troughton J, Smith B, McGettrick J, Dunlop T, De Rossi F, Pockett A, Spence M, Carnie M, Watson T, Charbonneau C (2020). In-depth analysis of defects in TiO2 compact electron transport layers and impact on performance and hysteresis of planar perovskite devices at low light Solar Energy Materials and Solar Cells
Sullivan GL, Gallardo JD, Jones EW, Hollliman PJ, Watson TM, Sarp S (2020). Detection of trace sub-micron (nano) plastics in water samples using pyrolysis-gas chromatography time of flight mass spectrometry (PY-GCToF). Chemosphere
Khodabakhshi S, Fulvio P, Andreoli E (2020). Carbon black reborn: Structure and chemistry for renewable energy harnessing Carbon
Burton MR, Boyle CA, Liu T, McGettrick J, Nandhakumar I, Fenwick O, Carnie MJ (2020). Full Thermoelectric Characterization of Stoichiometric Electrodeposited Thin Film Tin Selenide (SnSe). ACS applied materials & interfaces
Cai R, Martelli F, Vernieres J, Albonetti S, Dimitratos N, Tizaoui C, Palmer RE (2020). Scale-Up of Cluster Beam Deposition to the Gram Scale with the Matrix Assembly Cluster Source for Heterogeneous Catalysis (Catalytic Ozonation of Nitrophenol in Aqueous Solution). ACS applied materials & interfaces
Jones CD, Lewis AR, Jones DR, Ottley CJ, Liu K, Steed JW (2020). Lilypad aggregation: localised self-assembly and metal sequestration at a liquid-vapour interface. Chemical science
Alshammari K, Niu Y, Palmer RE, Dimitratos N (2020). Optimization of sol-immobilized bimetallic Au-Pd/TiO2 catalysts: reduction of 4-nitrophenol to 4-aminophenol for wastewater remediation. Philosophical transactions. Series A, Mathematical, physical, and engineering sciences
Rafique S, Burton MR, Badiei N, Gonzalez-Feijoo J, Mehraban S, Carnie MJ, Tarat A, Li L (2020). Lightweight and Bulk Organic Thermoelectric Generators Employing Novel P-Type Few-Layered Graphene Nanoflakes. ACS applied materials & interfaces
Chandiran K, Murugesan R, Balaji R, Andrews N, Pitchaimuthu S, Nagamuthu Raja K (2020). Long single crystalline α-Mn 2 O 3 nanorods: facile synthesis and photocatalytic application Materials Research Express
Dey T (2020). UV-reflecting sintered nano-TiO 2 thin film on glass for anti-bird strike application Surface Engineering
Ombaka LM, Curti M, McGettrick JD, Davies ML, Bahnemann DW (2020). Nitrogen/Carbon-Coated Zero-Valent Copper as Highly Efficient Co-catalysts for TiO2 Applied in Photocatalytic and Photoelectrocatalytic Hydrogen Production. ACS applied materials & interfaces
Johnston R, Thomas R, Jones R, Graves-Brown C, Goodridge W, North L (2020). Evidence of diet, deification, and death within ancient Egyptian mummified animals. Scientific reports
Mulla R, Jones D, Dunnill C (2020). Economical and Facile Route to Produce Gram-Scale and Phase-Selective Copper Sulfides for Thermoelectric Applications ACS Sustainable Chemistry & Engineering
Han Q, Gu Y, Gu H, Yin Y, Song J, Zhang Z, Soe S (2020). Laser powder bed fusion of WC-reinforced Hastelloy-X composite: microstructure and mechanical properties Journal of Materials Science
Bosch R, Ritter S, Herbst M, Kilian R, Burke M, Duff J, Scenini F, Gu Y, Dinu A, Ehrnstén U, Toivonen A, Novotny R, Martin O, Perosanz F, Legat A, Zajec B (2020). Stress corrosion crack initiation testing with tapered specimens in high-temperature water - results of a collaborative research project Corrosion Engineering, Science and Technology
Han Q, Gu Y, Wang L, Feng Q, Gu H, Johnston R, Setchi R (2020). Effects of TiC content on microstructure and mechanical properties of nickel-based hastelloy X nanocomposites manufactured by selective laser melting Materials Science and Engineering: A
Han Q, Gu Y, Huang J, Wang L, Low K, Feng Q, Yin Y, Setchi R (2020). Selective laser melting of Hastelloy X nanocomposite: Effects of TiC reinforcement on crack elimination and strength improvement Composites Part B: Engineering
Ben Dassi R, Chamam B, Méricq JP, Heran M, Faur C, El Mir L, Tizaoui C, Trabelsi I (2020). Pb doped ZnO nanoparticles for the sorption of Reactive Black 5 textile azo dye. Water science and technology : a journal of the International Association on Water Pollution Research
Burkitt D, Patidar R, Greenwood P, Hooper K, McGettrick J, Dimitrov S, Colombo M, Stoichkov V, Richards D, Beynon D, Davies M, Watson T (2020). Roll-to-roll slot-die coated P-I-N perovskite solar cells using acetonitrile based single step perovskite solvent system Sustainable Energy & Fuels
Holliman P, Kershaw C, Jones E, Meza-Rojas D, Lewis A, McGettrick J, Geatches D, Sen K, Metz S, Tizzard G, Coles S (2020). Novel benzothiazole half-squaraines: model chromophores to study dye-TiO 2 interactions in dye-sensitized solar cells Journal of Materials Chemistry A
Holliman P, Kershaw C, Jones E, Meza-Rojas D, Lewis A, McGettrick J, Geatches D, Sen K, Metz S, Tizzard G, Coles S (2020). Novel benzothiazole half-squaraines: model chromophores to study dye-TiO 2 interactions in dye-sensitized solar cells Journal of Materials Chemistry A
Burkitt D, Patidar R, Greenwood P, Hooper K, McGettrick J, Dimitrov S, Colombo M, Stoichkov V, Richards D, Beynon D, Davies M, Watson T (2020). Roll-to-roll slot-die coated P-I-N perovskite solar cells using acetonitrile based single step perovskite solvent system Sustainable Energy & Fuels
Blows R (2020). Development of Novel Thin-Ply Technology for Carbon Fibre Composite Materials
Russell J (2020). Characterisation and Performance Evaluation of Calcium Treatment in Automotive Steels


Koutsianos A, Kazimierska E, Barron A, Taddei M, Andreoli E (2019). A New Approach to Enhancing the CO2 Capture Performance of Defective UiO-66 via Post-Synthetic Defect Exchange
Smith B, Troughton J, Lewis A, McGettrick J, Pockett A, Carnie M, Charbonneau C, Pleydell-Pearce C, Searle J, Warren P, Varma S, Watson T (2019). Mass Manufactured Glass Substrates Incorporating Prefabricated Electron Transport Layers for Perovskite Solar Cells Advanced Materials Interfaces
Wint N, Khan K, Sullivan J, McMurray H (2019). Concentration Effects on the Spatial Interaction of Corrosion Pits Occurring on Zinc in Dilute Aqueous Sodium Chloride Journal of The Electrochemical Society
Potts S, Lau Y, Dunlop T, Claypole T, Phillips C (2019). Effect of photonic flash annealing with subsequent compression rolling on the topography, microstructure and electrical performance of carbon-based inks Journal of Materials Science
Gannon W, Jones D, Dunnill C (2019). Enhanced Lifetime Cathode for Alkaline Electrolysis Using Standard Commercial Titanium Nitride Coatings Processes
Hernandez-Aldave S, Tarat A, McGettrick JD, Bertoncello P (2019). Voltammetric Detection of Caffeine in Beverages at Nafion/Graphite Nanoplatelets Layer-by-Layer Films. Nanomaterials (Basel, Switzerland)
Lancaster R, Jeffs S, Illsley H, Argyrakis C, Hurst R, Baxter G (2019). Development of a novel methodology to study fatigue properties using the small punch test Materials Science and Engineering: A
Koutsianos A, Kazimierska E, Barron AR, Taddei M, Andreoli E (2019). A new approach to enhancing the CO2 capture performance of defective UiO-66 via post-synthetic defect exchange. Dalton transactions (Cambridge, England : 2003)
Lakhiani H, Dunlop T, De Rossi F, Dimitrov S, Kerremans R, Charbonneau C, Watson T, Barbé J, Tsoi W (2019). Variations of Infiltration and Electronic Contact in Mesoscopic Perovskite Solar Cells Revealed by High-Resolution Multi-Mapping Techniques Advanced Functional Materials
Lewis D, Lancaster R, Jeffs S, Illsley H, Davies S, Baxter G (2019). Characterising the fatigue performance of additive materials using the small punch test Materials Science and Engineering: A
Péan E, De Castro C, Davies M (2019). Shining a light on the photoluminescence behaviour of methylammonium lead iodide perovskite: investigating the competing photobrightening and photodarkening processes Materials Letters
Mitchell R, Strullu-Derrien C, Kenrick P (2019). Biologically mediated weathering in modern cryptogamic ground covers and the early Paleozoic fossil record Journal of the Geological Society
Robinson M, Soe S, Johnston R, Adams R, Hanna B, Burek R, McShane G, Celeghini R, Alves M, Theobald P (2019). Mechanical characterisation of additively manufactured elastomeric structures for variable strain rate applications Additive Manufacturing
De Fazio AF, El-Sagheer AH, Kahn JS, Nandhakumar I, Burton MR, Brown T, Muskens OL, Gang O, Kanaras AG (2019). Light-Induced Reversible DNA Ligation of Gold Nanoparticle Superlattices. ACS nano
Melvin C, Jewell E, Miedema J, Lammers K, Vooys A, Allman A, McMurray N (2019). Identifying interlayer surface adhesion failure mechanisms in tinplate packaging steels Packaging Technology and Science
Bolton R, Dunlop T, Sullivan J, Searle J, Heinrich H, Westerwaal R, Boelsma C, Williams G (2019). Studying the Influence of Mg Content on the Microstructure and Associated Localized Corrosion Behavior of Zn-Mg PVD Coatings Using SVET-TLI Journal of The Electrochemical Society
Rudd J, Gowenlock C, Gomez V, Kazimierska E, Al-Enizi A, Andreoli E, Barron A (2019). Solvent-free microwave-assisted synthesis of tenorite nanoparticle-decorated multi-walled carbon nanotubes Journal of Materials Science & Technology
Rudd J, Jones D, Dunnill C, Andreoli E (2019). Study of copper(II) oxide and copper(II) acetate on multiwalled carbon nanotubes by XPS Surface Science Spectra
Burton M, Mehraban S, Beynon D, McGettrick J, Watson T, Lavery N, Carnie M (2019). 3D Printed SnSe Thermoelectric Generators with High Figure of Merit Advanced Energy Materials
Hill D, Holliman P, Jones E, McGettrick J, Worsley D, Appleman M, Chatterjee P (2019). Desorption of carboxylates and phosphonates from galvanized steel: Towards greener lubricants Surface and Interface Analysis
Allman A, Jewell E, Vooys A, Hayes R, McMurray H (2019). Food packaging simulant failure mechanisms in next generation steel packaging Packaging Technology and Science
Hedayati A, Barnett C, Swan G, Orbaek White A (2019). Chemical Recycling of Consumer-Grade Black Plastic into Electrically Conductive Carbon Nanotubes C
Kang V, Johnston R, van de Kamp T, Faragó T, Federle W (2019). Sophisticated suction organs from insects living in raging torrents: Morphology and ultrastructure of the attachment devices of net-winged midge larvae (Diptera: Blephariceridae)
Oklobia O, Kartopu G, Irvine S (2019). CdCl 2 Activation of the ZnTe:As Back Contact Layer in CdTe Thin Film Solar Cells, Employing a CdS Sacrificial Layer
Birosca S, Liu G, Ding R, Jiang J, Simm T, Deen C, Whittaker M (2019). The dislocation behaviour and GND development in a nickel based superalloy during creep International Journal of Plasticity
Chen M, Liu D, Li W, Gurney RS, Li D, Cai J, Spooner ELK, Kilbride RC, McGettrick JD, Watson TM, Li Z, Jones RAL, Lidzey DG, Wang T (2019). Influences of Non-fullerene Acceptor Fluorination on Three-Dimensional Morphology and Photovoltaic Properties of Organic Solar Cells. ACS applied materials & interfaces
Raja P, Esquenazi G, Gowenlock C, Jones D, Li J, Brinson B, Barron A (2019). Electrodeposition of Cu-SWCNT Composites C
Fernández-Posada C, Barron A (2019). Analysis of commercial glasses with different strengthening treatments: Emphasis on the tin side, defects, structure connectivity and cracking behavior Journal of Non-Crystalline Solids
Mitchell R, Coleman M, Davies P, North L, Pope E, Pleydell-Pearce C, Harris W, Johnston R (2019). Macro-to-nanoscale investigation of wall-plate joints in the acorn barnacle Semibalanus balanoides : correlative imaging, biological form and function, and bioinspiration Journal of The Royal Society Interface
Marinelli G, Martina F, Lewtas H, Hancock D, Mehraban S, Lavery N, Ganguly S, Williams S (2019). Microstructure and thermal properties of unalloyed tungsten deposited by Wire + Arc Additive Manufacture Journal of Nuclear Materials
Mitchell R, Freitag S, Volkenandt T, Russell J, Davies P, Pleydell-Pearce C, Johnston R (2019). What Lies Beneath: 3D vs 2D Correlative Imaging Challenges and How to Overcome Them Microscopy and Microanalysis
Johnston R, Mitchell R, Pleydell-Pearce C, Coleman M, North L, LaBonte D, Oyen M, Board R, Pope E, Arora H, Howells D (2019). Correlating Microstructure to in situ Micromechanical Behaviour and Toughening Strategies in Biological Materials Microscopy and Microanalysis
Jones DR, Phillips R, Gannon WJF, Rome B, Warwick MEA, Dunnill CW (2019). Photocapacitive CdS/WOx nanostructures for solar energy storage. Scientific reports
Emery H, Johnston R, Rowley AF, Coates CJ (2019). Indomethacin-induced gut damage in a surrogate insect model, Galleria mellonella. Archives of toxicology
Edy J, McMurray H, Lammers K, deVooys A (2019). Kinetics of corrosion-driven cathodic disbondment on organic coated trivalent chromium metal-oxide-carbide coatings on steel Corrosion Science
Cieslak J, Tobola J, Przewoznik J, Berent K, Dahlborg U, Cornide J, Mehraban S, Lavery N, Calvo-Dahlborg M (2019). Multi-phase nature of sintered vs. arc-melted CrxAlFeCoNi high entropy alloys - experimental and theoretical study Journal of Alloys and Compounds
Taddei M, McPherson M, Gougsa A, Lam J, Sewell J, Andreoli E (2019). An Optimised Compaction Process for Zr-Fumarate (MOF-801) Inorganics
Barbé J, Hughes D, Wei Z, Pockett A, Lee H, Heasman K, Carnie M, Watson T, Tsoi W (2019). Radiation Hardness of Perovskite Solar Cells Based on Aluminum-Doped Zinc Oxide Electrode Under Proton Irradiation Solar RRL
Abbas B, Mohammad Y, Jewell E, Searle J (2019). Thermal sintering of printable copper for enhanced conductivity of FTO coated glass substrates Journal of Materials Science: Materials in Electronics
Hill D, Barron AR, Alexander S (2019). Comparison of hydrophobicity and durability of functionalized aluminium oxide nanoparticle coatings with magnetite nanoparticles-links between morphology and wettability. Journal of colloid and interface science
Jalalian-Khakshour A, Phillips C, Jackson L, Dunlop T, Margadonna S, Deganello D (2019). Solid-state synthesis of NASICON (Na3Zr2Si2PO12) using nanoparticle precursors for optimisation of ionic conductivity Journal of Materials Science
Llewelyn G, Rees A, Griffiths CA, Jacobi M (2019). A Novel Hybrid Foaming Method for Low-Pressure Microcellular Foam Production of Unfilled and Talc-Filled Copolymer Polypropylenes. Polymers
Oklobia O, Kartopu G, J C Irvine S (2019). Properties of Arsenic-Doped ZnTe Thin Films as a Back Contact for CdTe Solar Cells. Materials (Basel, Switzerland)
Liao T, Yadav A, Ferrari P, Niu Y, Wei X, Vernieres J, Hu K, Heggen M, Dunin-Borkowski R, Palmer R, Laasonen K, Grandjean D, Janssens E, Lievens P (2019). Composition-Tuned Pt-Skinned PtNi Bimetallic Clusters as Highly Efficient Methanol Dehydrogenation Catalysts Chemistry of Materials
Ghadbeigi H, Al-Rubaye A, Robinson F, Hawezy D, Birosca S, Atallah K (2019). Blanking induced damage in thin 3.2% silicon steel sheets Production Engineering
Hilal H, Lancaster R, Stapleton D, Baxter G (2019). Investigating the Influence of Process Parameters on the Structural Integrity of an Additively Manufactured Nickel-Based Superalloy Metals
Kang V, Johnston R, van de Kamp T, Faragó T, Federle W (2019). Morphology of powerful suction organs from blepharicerid larvae living in raging torrents BMC Zoology
Han Q, Gu Y, Setchi R, Lacan F, Johnston R, Evans S, Yang S (2019). Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy Additive Manufacturing
Taddei M, Schukraft G, Warwick M, Tiana D, McPherson M, Jones D, Petit C (2019). Band gap modulation in zirconium-based metal-organic frameworks by defect engineering Journal of Materials Chemistry A
Burton M, Mehraban S, McGettrick J, Watson T, Lavery N, Carnie M (2019). Earth abundant, non-toxic, 3D printed Cu 2−x S with high thermoelectric figure of merit Journal of Materials Chemistry A
Wei Z, Smith B, De Rossi F, Searle J, Worsley D, Watson T (2019). Efficient and semi-transparent perovskite solar cells using a room-temperature processed MoO x /ITO/Ag/ITO electrode Journal of Materials Chemistry C
Burkitt D, Swartwout R, McGettrick J, Greenwood P, Beynon D, Brenes R, Bulović V, Watson T (2019). Acetonitrile based single step slot-die compatible perovskite ink for flexible photovoltaics RSC Advances
Connell A, Wang Z, Lin Y, Greenwood P, Wiles A, Jones E, Furnell L, Anthony R, Kershaw C, Cooke G, Snaith H, Holliman P (2019). Low cost triazatruxene hole transporting material for >20% efficiency perovskite solar cells Journal of Materials Chemistry C


Clifford B, Beynon D, Phillips C, Deganello D (2018). Printed-Sensor-on-Chip devices - Aerosol jet deposition of thin film relative humidity sensors onto packaged integrated circuits Sensors and Actuators B: Chemical
Salvat Cantó J, Winwood S, Rhodes K, Birosca S (2018). A study of low cycle fatigue life and its correlation with microstructural parameters in IN713C nickel based superalloy Materials Science and Engineering: A
Reynolds TPS, Burridge HC, Johnston R, Wu G, Shah DU, Scherman OA, Linden PF, Ramage MH (2018). Cell geometry across the ring structure of Sitka spruce. Journal of the Royal Society, Interface
Burkitt D, Searle J, Watson T (2018). Perovskite solar cells in N-I-P structure with four slot-die-coated layers. Royal Society open science
Wei Z, Fung C, Pockett A, Dunlop T, McGettrick J, Heard P, Guy O, Carnie M, Sullivan J, Watson T (2018). Engineering of a Mo/Si x N y Diffusion Barrier to Reduce the Formation of MoS 2 in Cu 2 ZnSnS 4 Thin Film Solar Cells ACS Applied Energy Materials
Dunlop T, Jarvis D, Voice W, Sullivan J (2018). Stabilization of molten salt materials using metal chlorides for solar thermal storage Scientific Reports
Taylor T, McCulloch J (2018). Effect of Part/Die Boundary Conditions on Microstructural Evolution during Hot Stamping 2000 MPa Class Boron Steel steel research international
Alshehri N, Lewis A, Pleydell-Pearce C, Maffeis T (2018). Investigation of the growth parameters of hydrothermal ZnO nanowires for scale up applications Journal of Saudi Chemical Society
Radley E, Lowe C, Gethin D (2018). Stress Whitening in Polyester Melamine Coatings Johnson Matthey Technology Review
Burton MR, Liu T, McGettrick J, Mehraban S, Baker J, Pockett A, Watson T, Fenwick O, Carnie MJ (2018). Thin Film Tin Selenide (SnSe) Thermoelectric Generators Exhibiting Ultralow Thermal Conductivity. Advanced materials (Deerfield Beach, Fla.)
Safaie H, Mitchell R, Johnston R, Russell J, Pleydell-Pearce C (2018). An Assessment of Polarized Light Microscopy for the Quantification of Grain Size and Orientation in Titanium Alloys via Microanalytical Correlative Light to Electron Microscopy (CLEM) Microscopy and Microanalysis
Mitchell R, Pleydell-Pearce C, Coleman M, Davies P, North L, Johnston R, Harris W (2018). Correlative Imaging and Bio-inspiration: Multi-scale and Multi-modal Investigations of the Acorn Barnacle (Semibalanus balanoides) Microscopy and Microanalysis
Santos Gomes B, Cantini E, Tommasone S, Gibson JS, Wang X, Zhu Q, Ma J, McGettrick JD, Watson TM, Preece JA, Kirkman-Brown JC, Publicover SJ, Mendes PM (2018). On-Demand Electrical Switching of Antibody-Antigen Binding on Surfaces. ACS applied bio materials
Taddei M, Wakeham R, Koutsianos A, Andreoli E, Barron A (2018). Post-Synthetic Ligand Exchange in Zirconium-Based Metal-Organic Frameworks: Beware of The Defects! Angewandte Chemie
Taddei M, Wakeham RJ, Koutsianos A, Andreoli E, Barron AR (2018). Post-Synthetic Ligand Exchange in Zirconium-Based Metal-Organic Frameworks: Beware of The Defects! Angewandte Chemie (International ed. in English)
Burkitt D, Searle J, Worsley DA, Watson T (2018). Sequential Slot-Die Deposition of Perovskite Solar Cells Using Dimethylsulfoxide Lead Iodide Ink. Materials (Basel, Switzerland)
De Rossi F, Baker J, Beynon D, Hooper K, Meroni S, Williams D, Wei Z, Yasin A, Charbonneau C, Jewell E, Watson T (2018). All Printable Perovskite Solar Modules with 198 cm 2 Active Area and Over 6% Efficiency Advanced Materials Technologies
Philo A, Mehraban S, Holmes M, Sillars S, Sutcliffe C, Sienz J, Brown S, Lavery N (2018). A pragmatic continuum level model for the prediction of the onset of keyholing in laser powder bed fusion The International Journal of Advanced Manufacturing Technology
D'Amato R, Donnadio A, Carta M, Sangregorio C, Tiana D, Vivani R, Taddei M, Costantino F (2018). Water-Based Synthesis and Enhanced CO 2 Capture Performance of Perfluorinated Cerium-Based Metal-Organic Frameworks with UiO-66 and MIL-140 Topology ACS Sustainable Chemistry & Engineering
Ahmad F, Soe S, White N, Johnston R, Khan I, Liao J, Jones M, Prabhu R, Maconochie I, Theobald P (2018). Region-Specific Microstructure in the Neonatal Ventricles of a Porcine Model. Annals of biomedical engineering
Ahmad F, Prabhu RJ, Liao J, Soe S, Jones MD, Miller J, Berthelson P, Enge D, Copeland KM, Shaabeth S, Johnston R, Maconochie I, Theobald PS (2018). Biomechanical properties and microstructure of neonatal porcine ventricles. Journal of the mechanical behavior of biomedical materials
Davies S, Jeffs S, Coleman M, Lancaster R (2018). Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy Materials & Design
Mazzali F, Orzech M, Adomkevicius A, Pisanu A, Malavasi L, Deganello D, Margadonna S (2018). Designing a High-Power Sodium-Ion Battery by in Situ Metal Plating ACS Applied Energy Materials
Pleass C, Jothi S (2018). Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser Melting Additive Manufacturing
North Laura E. (2018). Bioinspired investigation via X-ray microtomography


Baker J, Mouhamad Y, Hooper K, Burkitt D, Geoghegan M, Watson T (2017). From spin coating to roll-to-roll: investigating the challenge of upscaling lead halide perovskite solar cells IET Renewable Power Generation
Jones J, Whittaker M, Buckingham R, Johnston R, Bache M, Clark D (2017). Microstructural characterisation of a nickel alloy processed via blown powder direct laser deposition (DLD) Materials & Design
Evans E, Davies S, Johnston R (2017). Phantom creation and analysis: Improving X-Ray microtomography scanning of soft sediment cores containing volcanic ash Journal of Physics: Conference Series
North L, Labonte D, Oyen M, Coleman M, Caliskan H, Johnston R (2017). Chemical-microstructural-nanomechanical variations in the structural units of the cuttlebone of Sepia officinalis
D'Onofrio C, van Loon R, Rolland S, Johnston R, North L, Brown S, Phillips R, Sienz J (2017). Three-dimensional computational model of a blood oxygenator reconstructed from micro-CT scans. Medical engineering & physics
North L, Labonte D, Oyen M, Coleman M, Caliskan H, Johnston R (2017). Interrelated chemical-microstructural-nanomechanical variations in the structural units of the cuttlebone of Sepia officinalis APL Materials
Evans, E, Elizabeth Evans, Siwan Davies, Richard Johnston, Peter Abbott, Sabine Wul (2017). Revealing the three-dimensional geometry of tephra horizons found within soft sediment deposits EGU2017, proceedings from the conference held 23-28 April, 2017 in Vienna, Austria.
Orzech M, Mazzali F, McGettrick J, Pleydell-Pearce C, Watson T, Voice W, Jarvis D, Margadonna S (2017). Synergic effect of Bi, Sb and Te for the increased stability of bulk alloying anodes for sodium-ion batteries Journal of Materials Chemistry A
Phillips C, Al-Ahmadi A, Potts SJ, Claypole T, Deganello D (2017). The effect of graphite and carbon black ratios on conductive ink performance. Journal of materials science


Jones EW, Holliman PJ, Connell A, Davies ML, Baker J, Hobbs RJ, Ghosh S, Furnell L, Anthony R, Pleydell-Pearce C (2016). A novel dimethylformamide (DMF) free bar-cast method to deposit organolead perovskite thin films with improved stability. Chemical communications (Cambridge, England)
Morkot Robert, Price Campbell, Forshaw Roger, Chamberlain Andrew, Nicholson Paul, Tyldesley Joyce (2016). Mummies, Magic and Medicine in Ancient Egypt: Multidisciplinary Essays for Rosalie David 
Proceedings of the 13th World Conference on Titanium - TMS/Proceedings Microstructure and Mechanical Property Relationships in Electron Beam Melted Titanium Alloys
Riva S, Fung C, Searle J, Clark R, Lavery N, Brown S, Yusenko K (2016). Formation and Disruption of W-Phase in High-Entropy Alloys Metals
Lancaster R, Davies G, Illsley H, Jeffs S, Baxter G (2016). Structural Integrity of an Electron Beam Melted Titanium Alloy. Materials (Basel, Switzerland)
Gardner S, Li W, Coleman M, Johnston R (2016). The effects of thermomechanical history on the microstructure of a nickel-base superalloy during forging Materials Science and Engineering: A
Wei Z, Zhu M, McGettrick J, Kissling G, Peter L, Watson T (2016). The effect of additional sulfur on solution-processed pure sulfide Cu2ZnSnS4 solar cell absorber layers MRS Advances
Wei Z, Newman M, Tsoi W, Watson T (2016). Raman mapping analysis for removal of surface secondary phases of CZTS films using chemical etching Applied Physics Letters
Lancaster R, Illsley H, Davies G, Jeffs S, Baxter G (2016). Modelling the small punch tensile behaviour of an aerospace alloy Materials Science and Technology
Hurst R, Lancaster R, Jeffs S, Bache M (2016). The contribution of small punch testing towards the development of materials for aero-engine applications Theoretical and Applied Fracture Mechanics
Loame RC, D.J. Lowe, S.M. Davies, V.G.  Moon, C.R. Magill, R. Johnston, N.J.G. Pearce, A. Pittari, B.R.S. Fox (2016). Hazard hunting: X-ray micro-CT reconnaissance analysis of c. 20,000 year-old lake sediment cores for tephra seismites and cryptotephra deposits, Waikato region, New Zealand. Australasian Quaternary Association (AQUA) Biennial Conference "Quaternary Perspectives from the City of Volcanoes.
Lowe DJ, Loame RC, Moon RC, Kluger MO, Villamor P, de Lange WP, Vandergoes MJ, Rees ABH, Davies SM, Morz T (2016). Tephra seismites: a new tool to evaluate, date, map, and model paleoseismicity using tephra liquefaction in c. 20,000-year-old lake sediments in the Waikato region, New Zealand. Australasian Quaternary Association (AQUA) Biennial Conference "Quaternary Perspectives from the City of Volcanoes"
Owen NJ, Boston CV, Aldridge SJ, Johnston R, Loe L (2016). Validity of Photogrammetric Osteological Analysis for Sex Traits of Historic Crania 18th  Annual  Conference  British Association  for  Biological  Anthropology and  Osteoarchaeology
Evans EE, Johnston R E, Davies SM (2016). Phantom creation and analysis: Improving X-Ray Microtomography scanning of soft sediment cores containing volcanic ash XRM 2016 -13th International Conference on X-Ray Microscopy


Griggs AJ, Davies SM, Abbott PM, Coleman M, Palmer AP, Rasmussen TL, Johnston R (2015). Visualizing tephra deposits and sedimentary processes in the marine environment: The potential of X-ray microtomography. Geochemistry, geophysics, geosystems : G(3)
Evans EE, Davies S M., Wulf S, Johnston R E (2015). Investigating tephra in sedimentary deposits using X-ray microtomography Tomography for Scientific Advancement Conference (TOSCA)
Ahmad F, Soe S, Skacel P, Johnston R, Maconochie I (2015). Biaxial and shear properties of immature porcine heart tissue 2nd Soft Tissue Modelling Workshop
North L, Johnston R (2015). 4D imaging by X-ray microtomography of the failure behaviour in cuttlebone TMS 2015
Moyle D, Johnston R (2015). Understanding the behaviour of abradable coatings using X-ray microcomputed tomography TMS 2015
Gardner S, Li W, Johnston R (2015). An investigation into the effects of thermomechanical history on the microstructure of a nickel-base superalloy during forging TMS 2015